SERIAL TYPE |
 |
CWF-01/02 |
OPTICAL DATA TRANSMISSION DEVICE |
 |
Transmission distance 50m, Small size and Light weight |
Feature
- Necessary specifications are built-in 40x80x80mm. This is suitable for the application such as automatic warehouse, stacker crane or overhead crane as well as BWF series.
Specifications
Model No. |
CWF-01A |
CWF-01B |
CWF-02A |
CWF-02B |
Transmission distance |
50ｍ |
|||
Directional angle |
±2° |
|||
Power source |
24VDC（+10％，-10％） |
|||
Current consumption |
80mA |
|||
Transmission method |
Full-duplex two-way transmission |
|||
Transmission speed |
DC to 19,200bps |
DC to 9,600bps |
||
Interface |
RS-422 |
RS-232C |
||
Modulation method |
FSK modulation |
|||
Modulated frequency |
Transmission:5.5MHz |
Transmission:6.0MHz |
Transmission:5.5MHz |
Transmission:6.0MHz |
Connection |
D-sub connector with 9-pin |
|||
Ambient temperature/humidity |
-10 to +50 degrees C, 85%RH or less(not icing) |
|||
Ambient illuminance |
20,000lux or less(Halogen/incandescent lamp) |
|||
Impact resistance |
490m/s2, each 10 time in X, Y and Z directions |
|||
Vibration resistance |
Double amplitude 1.5mm, 10 to 55Hz, each 2 hour in X, Y and Z directions |
|||
Noise resistance |
Impulse noise simulator, pulse width:1µ, 100ns, repeated cycle:100Hz, normal mode 1000V, common mode 500V |
|||
Protective structure |
IP60(IEC standard) |
|||
Warning output(ARM) |
ON when light-receiving level margin 1.5 times or more, Photo-coupler, open-collector 35V, 50mA |
|||
Weight |
Approx. 240g |
|||
* Multi-connection type with CS(Chip select) input which can be connected up to max.10 pcs is lined-up.
* 12VDC type is available.
External dimension
Input/output circuit
CWF-01A/01B
CWF-02A/02B
Connection
CWF-01A/01B
Interface |
Pin No. |
Symbols |
Functions |
RS-422 |
1 |
＋RD |
Reception data |
2 |
-RD |
||
3 |
＋SD |
Transmission data |
|
4 |
-SD |
||
5 |
SG |
Ground for signal |
|
Power source |
6 |
＋VIN |
DC power(24VDC) |
7 |
-VIN（0V） |
||
Warning |
8 |
ARM |
Warning output (ARM) |
9 |
ARM COM |
CWF-02A/02B
Interface |
Pin No. |
Symbols |
Functions |
RS-232C |
1 |
CD |
Reception data(Carrier detect) |
2 |
RD |
Transmission data |
|
3 |
SD |
Reception data |
|
4 |
NC |
Non-connection |
|
5 |
SG |
Ground for signal |
|
Power source |
6 |
＋VIN |
DC power(24VDC) |
7 |
-VIN（0V） |
||
Warning |
8 |
ARM |
Warning output (ARM) |
9 |
ARM COM |
Note) Don't connect 0V(-VIN) for power source to ground for signal(SG).
