Open Network Type Optical Data Transmission Device |
 |
DMC |
OPTICAL DATA TRANSMISSION DEVICE |
 |
Direct connection to DeviceNet PLC |
Feature
- This device is 8bit optical data transmission device which is able to connect to PLC for DeviceNet.
- This is able to optical communication with parallel type DMS-G/HB and DM-G/HB.
- Max. 63 pcs can be connected to 1 master unit.
Specifications
Model No. |
DMC-GB1 |
DMC-HB1 |
||||||||||||||||
Direction |
HEAD-ON |
SIDE-ON |
||||||||||||||||
Power source |
24VDC(+15%, -10%, ripple 0.5Vp-p or less), PLC side : 40mA or less, Device side : 50mA or less |
|||||||||||||||||
Transmission capacity |
Input 8 bits/output 8 bits(SELECT and GO can be transmitted by dip switch) |
|||||||||||||||||
Address setting |
Individual setting by dip switch |
|||||||||||||||||
Connection |
Connector : 5-pin(for PLC), 2-pin(for power source) |
|||||||||||||||||
Optical communication part |
Transmission distance |
0.6m* |
||||||||||||||||
Directional angle |
Full angle 30° |
|||||||||||||||||
Transmission method |
Half-duplex two-way transmission |
|||||||||||||||||
Transmission time |
40ms |
|||||||||||||||||
Modulation method |
Pulse modulation |
|||||||||||||||||
Detection method |
Parity check |
|||||||||||||||||
DeviceNet part |
Connecting system |
Multi-drop system |
||||||||||||||||
Communication speed |
500Kbps/250Kbps/125Kbps(Changeover by switch) |
|||||||||||||||||
Communication cycle time |
12.2msec(Connection Nos. 32 pcs at communication speed, 500kbit/s) |
|||||||||||||||||
Communication media |
Communication media |
|||||||||||||||||
Communication distance |
|
|||||||||||||||||
Max. Nos. of connection node |
64 pcs(including master unit, max. connectable slave 63 pcs) |
|||||||||||||||||
Ambient illuminance |
4,000 lx(Halogen and mercury lamp) |
|||||||||||||||||
Protective structure |
IP40(IEC standard) |
|||||||||||||||||
*3m type is also available.
External dimension
Connection
5P side(PLC connection)
Colors |
Signals |
Functions |
Position |
Red |
+24V |
Power |
1 |
White |
Can+ |
Signal |
2 |
Shield |
Shield |
3 |
|
Blue |
Can- |
Signal |
4 |
Black |
+0V |
Power |
5 |
2P side(Power source)
Colors |
Signals |
Functions |
Position |
+24V |
Power |
1 |
|
+0V |
Power |
2 |
Note) Don't make a wiring with main circuit, high-voltage line or load wire because it is not affected by noise and surge induction.
