Serial/parallel converter |
 |
ISP-A1C |
Serial/parallel converter |
 |
This device can convert serial data into parallel output or parallel input into serial data. This device can transmit so many I/O signals with a few signal line. This device is much higher speed than usual type. |
Feature
- It can transmit signals with 16 points max./unit for both input and output.
- It can extend up to 128 points max. by increasing units.
- It can make a high-speed transmission with 62.5kbps.
- It can make a DIN-rail mounting with 35mm pitch.
Specifications
Model No. |
ISP-A1C*(Main and sub unit) |
|
Power source |
18 to 30VDC(ripple10% or less),100mA(except for photo-coupler interface) |
|
Current consumption |
Input 85mA or less, output 850mA or less |
|
Serial interface |
Type |
RS-422 and RS-485 |
Transmission method |
Full-duplex two-way transmission system |
|
Transmission speed |
62.5k/19.2k/9,600/4,800/2,400bps(Changeover) |
|
Transmission distance |
Host communication: 500m(Total length) |
|
Parallel interface |
Input signal numbers |
16 points(It can extend up to 128 points by increasing units) |
Input circuit |
Photo-coupler isolation |
|
Output signal numbers |
16 points(It can extend up to 128 points by increasing units) |
|
Output circuit |
Photo-coupler isolation |
|
Ambient temperature/humidity |
-10 to +50 degrees C, 85%RH or less |
|
Connection |
Screw terminal for power source, connector for the others |
|
Case |
ABS resin(body), polycarbonate resin(cover) |
|
Weight |
Approx. 260g |
|
* Use this device with BWF series. If CWF series, use ISP-A1C-C.
External dimension
Input/output circuit
|
Connection
|
* Ask us about details specifications.
