Optical Remote Controller |
 |
BRC-G |
|
 
|
Stable operation and high reliability against disturbance noise This is a remote controller with high reliability. Operation and handling are improved. 4-point type and 12-point type are lined up and special type is also available. |
Specifications
Specifications(Transmitter)
Model No. |
BRC-G24T |
BRC-G44T |
Kind |
4-point transmitter |
|
Power source |
Alkaline cell 4 pcs |
|
Projecting element |
Infra-red LED |
|
Directional angle |
Full angle 30° |
|
Transmission distance |
10m |
20m |
Transmission point |
4 points |
|
Transmission method |
Transmitted by transmission key(1 to 4), Double key-in is also available by changeover switch |
|
Transmission check |
Electronic buzzer(Ringing during transmitting) |
|
Case |
ABS resin(Handling part : Polyester film) |
|
Weight |
Approx. 120g |
|
Specifications(Transmitter)
Model No. |
BRC-G2BT |
BRC-G4BT |
Kind |
12-point transmitter |
|
Power source |
Alkaline cell 4 pcs |
|
Projecting element |
Infra-red LED |
|
Directional angle |
Full angle 30° |
|
Transmission distance |
10m |
20m |
Transmission point |
12 points |
|
Transmission method |
Transmitted by transmission key(1 to 12), Double key-in is also available by changeover switch |
|
Transmission check |
LED(Lighting during transmitting) |
|
Case |
ABS resin(Handling part : Polyester film) |
|
Weight |
Approx. 200g |
|
Specifications(Receiver)
Model No. |
BRC-G2AR |
BRC-G2BR |
BRC-H2AR |
BRC-H2BR |
Kinds |
4 points |
12 points |
4 points |
12 points |
HEAD-ON |
FRONT-ON |
|||
Power source |
24VDC(±20%, ripple 10% or less) |
|||
Reception element |
Photo-diode |
|||
Directional angle |
50°for vertical and 90°for horizontal(Full angle) |
|||
Reception method |
FSK modulation, output is effective when reverse code corresponds |
|||
F number registration |
Set by transmitter |
|||
Output |
Data output : 4 pcs(BRC-G2AR, BRC-H2AR), 12 pcs(BRC-G2BR, BRC-H2BR), strobe : 1 pcs, photo-coupler isolation, open-collector output(Max.35V, 50mA, residual voltage Max. 1.5V) |
|||
Connection |
Cable with connector(2m long) |
|||
Ambient illuminance |
10,000lx or less(Fluorescent lamp, mercury lamp) |
|||
Ambient temperature |
-10 degrees C to +50 degrees C |
|||
Ambient humidity |
45 to 85%RH |
|||
Protective structure |
IP66(IEC standard) |
|||
Note) While working automatic power-off function and under automatically power source would be off, even if power switch is repeated with ON→OFF→ON, there is no display on LCD. In case that, press any keys(1 to 4) after putting power source on. Turn to the normal mode and it is possible to transmit.
External dimension
●Receiver
Front-ON type
Head-ON type
※Use it when registering F No.
●Transmitter
12-point type
4-point type
Output circuit
DC35V 50mA Residual voltage1.5V
Connection
4-point type receiver
 |
Connector 15P (JST PHR-15) Shield |
Colors |
Pin No. |
Functions |
Black |
1 |
Power 0V |
Black |
2 |
Power +V |
Red |
3 |
OUT4 |
Orange |
4 |
OUT3 |
White/yellow |
5 |
OUT2 |
Yellow |
6 |
OUT1 |
White/blue |
7 |
|
Green |
8 |
|
Blue |
9 |
|
Purple |
10 |
|
Gray |
11 |
COM |
White |
12 |
Strobe |
Yellow/green |
13 |
OUT2 |
Yellow/red |
14 |
|
Yellow/black |
15 |
|
Shield |
Shield |
|
Note) Don't use attached connector as relay terminal.
12-point type receiver
 |
Connector (1)12P (JST PHR-12) Connector (1)10P (JST PHR-10) Shield |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
* It is short-circuited inside. ON when data would be fixed.
Note) Don't use attached connector as relay terminal.
