Optical Remote Controller |
 |
GRC-G |
Optical remote controller for hoist crane |
 |
Exclusive remote controller for hoist crane, 50 hours in continuous transmission |
Features
- Light source is infra-red ray and this means high reliability against noise and there is no legal regulation, too.
- It is easy to handle because of light weight, approx. 330g including battery.
- No interference between devices because of 64 kinds of ID
Specifications
Specifications(Transmitter)
|
Model No. |
GRC-G3BT-Z |
|
Power source |
Alkaline cell 4 pcs(nicad battery is available) |
|
Key operation |
East, West, South, North, Up, Down, Warning, ON, OFF, 3 pcs of spare Total 12 pcs |
|
Transmission distance |
0 to 15m |
|
Directional angle |
Up/down direction : full angle 60°, right/left direction : full angle 60° |
|
Battery life |
50 hours in continuous transmission(12 hours for nicad battery) |
|
Protective structure |
IP64(IEC standard) |
Specifications(Receiver)
|
Model No. |
DM-DSP13 |
|
Power source |
100 to 240VAC(±10%, 50/60Hz) |
|
Output |
Relay output : Data output --- 12 points, Strobe --- 1 point, Contact capacity : 250VAC 2.5A(inductive load) |
|
Model No. |
GRC-G2BR-W |
|
Power source |
Supplied from receiver |
|
Directional angle |
Full angle 90° |
|
Connection |
Cable with connector(2m long) |
|
Protective structure |
IP64(IEC standard) |
* Protective cover for transmitter is available as option.
External dimension
■Receiver-Head
■Receiver
■Transmitter
Connection(output circuit diagram)
