Products List

PHV

High performance design with using LED
This series are ideal for detection steel materials in harsh environments at steel plants and heavy industry.

PRV

Fiber optic type HMD.
It operates by detecting infrared rays (heat rays) radiated from the heat material.
It is ideal for detecting steel materials at steel plants and heavy industry in harsh environments. Detectable hot metal temp is 360 to 1,200 degrees C

PH-DX/PH-WX

LED type CMD.
It uses a robust die-casting case and is ideal for detecting steel materials at steel plants and heavy industry. A lineup of water-cooled case type is also available.

MBX-301CA

Microwave type not affected by vapor, disturbance light or smoke

MBX-211

Detecting accuracy is high because of geometrical setting system

MBF

Stable operation under severe environment because of using microwave

LAV

High performance design with using semiconductor laser.
This series are ideal for detection steel materials in harsh environments at steel plants and heavy industry.

Sensor Head and Fiber Unit for CMD/HMD

Semiconductor laser type detectors and other various products suitable for severe environments

PD5

Stable performance
No influence by color and gloss
Long distance 2.5m

PD-10M/8NM

By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Featured points:
Analog output in proportion to distance
Two comparator outputs within any distance

FG-31C/51C

Case: die casting
Width: 31mm and 51mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

FC-51C

Width: 50mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

FBX-25

One-beam and two-beam types available
Width: 25mm, repeatability: +/-0.1mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

DMS-G/H-E

Optical Data Transmission Device with high-frequency noise resistance.

This is Parallel I/O with 4-bit and 8-bit type. It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this. Compatible with SEMI E84 standard.

DMS-G/H-V

This is Parallel I/O with 4-bit and 8-bit type. It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this. Model numbers corresponded to SEMI E84 are lined up.

DMG

This is Parallel I/O with 4-bit and 8-bit type.
It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this.
Model numbers corresponded to SEMI E84 are lined up.
This is provided a logging function and it is useful to solve some troubles such as interlocking.

DMJ-G/HB1

This is Parallel I/O (8-bit) with RJ-11 modular cable type.
It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this.
This is provided with a logging function and corresponded to SEMI E84.
This composes of Head, Connector and RJ-11 cable, it is user friendly to make wiring.

DMH-GB/HB

The transmission time is 7ms which is 5 times faster than the normal 8-bit DM series.
So it’s possible to transfer and receive more data within limited time.

DMH-GC/HC

More compact and lighter compare with previous models.
With light emission adjuster, the transmission distance can be easily customized.

DMM

There are compatibilities between:
DMM-GB/HB and DMS-GB/HB-V
DMM-GC/HC (16 bit) and DMH-GC/HC
Therefore they can be used together as the communication partners.
With detachable connectors, maximum 64 units can be connected to a master unit.

BWF-11/21/31/41

Long distance Optical Data Transmission Device with serial interfaces.
Sophisticated functions are available even with the compact size and light weight.
The long distance transmission is enabled by our own data signal processing technologies.
Transmission speed: up to 19.2kbps
Interface: RS-232C/422 and Current loop/RS-232C etc.

BWF-17/27

Maximum 112 points, 16 words can be transmitted.
Maximum 42 units can be connected to a master unit.

BWF-3E/4E-CE

Optical Data Transmission Device / Open Network

CWF-01/02

All necessary features are included within the body size 80x80x40mm.
Applications are for controlling starker cranes of automatic warehouse and other overhead cranes which require certain distance.

CWF-11/12

Transmission distance is 80m that is the longer version of CWF-01/02.
Optical axis can be easily adjusted.

EWF-0/1E-N

100Mbps optical repeater which can directly connet to the Ethernet line.
Setting of MAC address or IP is not required and it can be used as LAN cables.Non-contact transmission is available for up to 100m between moving devices.

*This model integrates the conventional model.

BRS

Compare with the traditional model, this new series is much smaller and thinner.
Backlight in the screen makes it easy to see.
Lifetime is improved by suing the sheet switch in the key board.

BRC-G

4-point and 12-point type are available
Meet the industrial needs with its high reliability

BNC

You can confirm the operation quality before or after SEMI E84 communication using the device.
With 2 types of application software, you can read the following data in the form of timing chart through a computer:
a) Interlocks simulation before handling materials
b) Optical communication logging data in DMG sensor after handling materials, as a method of solving troubles

ISP-A1C

Convert serial data to parallel format or the reverse
Transfer a large number of signals with a few wires
Wireless transmission can be sassily done with our Optical Data Transmission Devices.
Transmission speed is faster compare with the previous model.

YVT-35LX-F0/FK

3D LRF
3D Scanning Range Finder.
The distance is measured by steering the laser beam vertically and horizontally.
In 1 frame, a point cloud with 2590 points is generated.
It is possible to increase the point cloud density using the interlacing mode.
This scanner is equipped with an acceleration sensor and a PPS input signal.

UBG-04LX-F01

28msec scanning time, suitable for high speed robots to avoid obstacles or make road map. 4m and 240° scanning range, DC12V.

PBS-03JN

Infra-red LED light source, distance measurement type obstacle detector.
Fine settings available for each pattern,
greatly improved than normal reflective photo sensors.
Scanning angle: 180°

UBG-05LN

Accuracy is greatly improved compared with PBS series.
With DC24V, this sensor can be broadly used for control system or equipment.
Field pattern: 31.

UTM-30LN

30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Suitable for security purpose as a monitor in outdoor environment.
25msec scanning time, also possible for sticking-out detection.

UTM-30LX

30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Possible for outdoor applications such as service robots.
Suitable for robots with higher moving speed because of 25msec scanning time.

UTM-30LX-EW

Ethernet interface type of Top-URG.
Protection structure is improved to IP67,
and it is more suitable for outdoor use even in the environment with 100,000lx.

UXM-30LX-EW

Stable detection even targeting black objects.
Multi-echo functionality and IP67 available.

UXM-30LN-PW

Stable detection even targeting black objects.
Multi-echo functionality and IP67 protection,
and make it possible to operate under harsh environment such as rain, snow and fog.

UGM-50LXP/ UGM-50LXN

Max. distance 120m for outdoor.
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.

UGM-50LAP/ UGM-50LAN

Max. distance 120m for outdoor.
Area Output Model
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.

URM-40LC-EWT

NEW MODEL
New 2D Scanning Range Finder for outdoor
Compact model and the 40m range.
Multi-echo functionality and IP67 protection with it.

UXM-30LXH-EHA

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.

UXM-30LAH-EHA

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.

UXM-30LXH-EWA

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.

UXM-30LAH-EWA

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
More flexible field setting is also available.

UST-30LX

Outdoor model with Small Size
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on even smaller robots or Unmanned Aerial Vehicles.

UST-30LC/LCN

Scanning Rangefinder / Area configuration type

UST-15LX

Outdoor model with Small Size
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on even smaller robots or Unmanned Aerial Vehicles.

UST-10/20LX

The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on
even smaller robots or Unmanned Aerial Vehicles.

UST-10/20LN

10m and 20m Scanning Range and Compact!
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.

UST-05LA/05LAP

Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.

UST-05LX

New model : Distance output type of the UST-05 series.
Upgraded with wider detection range and faster response time.

UST-05LN / UST-05LNP

Very compact!
NPN and PNP types are available.
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.

YLM-X001

Prototype (limited quantity)
Mass production planned for early 2024
3D LiDAR jointly developed with Lumotive
Press Release

UAM-05LP-T301/T301C

Safety Sensor
A compact design for installation on AGVs, AGCs as well as in vertical guarding applications.
Conformity Standards
IEC61496-1/3: Type3
IEC61508: SIL2
ISO13849-1: PL d Category3

KAD-300

Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range. KAD-300 is the longer distance version of KAD-200

KAD-200

Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range.

PGL-050W3/180W3

NEW 180m Distance (maximum)
Laser Distance Measurement
Long distance type laser sensor
Two models are available

AreaDesigner for Tablet

Android/iOS app of AreaDesigner for tablet

Measurement monitoring and confirmation of area settings is possible from Android/iOS tablet device.