Serial type BWF | Optical Data Transmission Devices | PRODUCTS

Home > Products > Optical Data Transmission Devices > BWF

Optical Data Transmission Devices | Photo sensor | Auto counter | Automatic door

Parallel type

Serial type

Products Compatible
with open networks

Serial/Parallel
data converter

Optical Remote Controller

SERIAL TYPE

BWF[Serial type/long distance type]	OPTICAL DATA TRANSMISSION DEVICE
	High performance in compact and light weight of handy size, 44 x 84 x 130.3mm! Long distance, 100m and 200m! 400m type is also available in the same size!

Feature

Actual transmission distance is 2 times or more than rated value and data transmission with high reliability is realized.
Many kinds of interface are lined up, RS-232C, RS-422, current-loop and RS-422/RS-485 multi-drop, etc.
Level lowering warning output is provided due to prevent some troubles such as dislocation of optical axis or dirty lens surface.
It can be easy to check optical axis adjustment with optical checker or checking terminal.

Specifications

Model No.	BWF-11A/11B	BWF-21A/21B	BWF-31A/31B	BWF-41A/41B
Transmission distance	100m	200m	100m	200m
Directional angle	±2°	±1°	±2°	±1°
Transmission method	Full-duplex two-way transmission
Transmission speed	DC to 19.2kbp
Interface	RS-232C/RS-422
Modulation method	FSK modulation
Modulated frequency	A type(Transmission:5.5Hz, reception:6.0Hz), B type(Transmission:6.0Hz, reception:5.5Hz)
Power source	12 to 24VDC(Allowable operating voltage 10 to 30VDC)		12 to 24VDC(Allowable operating voltage 10 to 30VDC)
Current consumption	150mA or less(when 12VDC), 80mA or less(when 24VDC)		40mA
Indications lamps	Power source, carrier detect, data input, data output, light-reception level margin(Red LED) POW(Power lamp): Light-up when power source ON CD(Carrier detect lamp): Light-up when light-reception, light-reception margin level 1 SD(Data input lamp): Light-up when transmission data input RD(Data output lamp): Light-up when reception data output L1(Light-reception level lamp): Light-up when margin 1.5 times L2((Light-reception level lamp): Light-up when margin 2 times L3(Light-reception level lamp): Light-up when margin 2.5 times
Warning output (ARM)	ON when light-receiving level margin 1.5 times or more and OFF when it is 1.5 times or less, Photo-coupler(35V, 50mA)
Light-reception level output	0 to 5V(in proportion to light-reception amount)
Connection	Connector type(D-sub connector with 25-pin), M3 screw terminal for power source
Ambient illuminance	20,000lux or less(sunlight/incandescent lamp)
Ambient temperature/humidity	-10 to +50 degrees C, 85%RH or less(not icing)
Protective structure	IP60(IEC standard), IP64 is available if option parts are used

Note) Ask us about current-loop and multi-drop interface.

External dimension

Input/output circuit

Connection

Power terminal(M3 screw terminal)

Make sure to connect +V to terminal at left side for DC power. DC power provides on connector for interface too. Connect either one.

Connector for interface

Interface	Pin No.	Symbols	Functions
RS-232C	2	SD	Transmission data
	3	RD	Reception data
	8	CD	Reception carrier detect
	21	SD　OFF	Transmission stop
RS-422	14	+SD	Transmission data(+)
	15	-SD	Transmission data(-)
	16	+RD	Reception data(+)
	17	-RD	Reception data(-)
	18	+CD	Reception carrier detect(+)
	19	-CD	Reception carrier detect(-)
	12	+SRD　OFF	Transmission/reception stop(+)
	13	-SRD　OFF	Transmission/reception stop(-)
Level	6	LEVEL	Light-reception level output
	7・20	SG(OV)	Ground for signal
Warning	4	ARM	Warning output (ARM)
Warning	5	ARM　COM(OV)	Warning output (ARM)
Power source	11	+VIN	DC Power（voltage 10 to 30VDC)
Power source	23	-VIN(OV)	DC Power（voltage 10 to 30VDC)

Note) Don't connect 0V for power source to ground for signal(SG).

PAGE TOP