Products

Search - Type

Category

Group

Series

thumbnail

BNC

You can confirm the operation quality before or after SEMI E84 communication using the device.
With 2 types of application software, you can read the following data in the form of timing chart through a computer:
a) Interlocks simulation before handling materials
b) Optical communication logging data in DMG sensor after handling materials, as a method of solving troubles

thumbnail

BRC-G

4-point and 12-point type are available
Meet the industrial needs with its high reliability

thumbnail

BRS

Compare with the traditional model, this new series is much smaller and thinner.
Backlight in the screen makes it easy to see.
Lifetime is improved by suing the sheet switch in the key board.

thumbnail

BWF-11/21/31/41

Long distance Optical Data Transmission Device with serial interfaces.
Sophisticated functions are available even with the compact size and light weight.
The long distance transmission is enabled by our own data signal processing technologies.
Transmission speed: up to 19.2kbps
Interface: RS-232C/422 and Current loop/RS-232C etc.

thumbnail

BWF-17/27

Maximum 112 points, 16 words can be transmitted.
Maximum 42 units can be connected to a master unit.

thumbnail

CWF-01/02

All necessary features are included within the body size 80x80x40mm.
Applications are for controlling starker cranes of automatic warehouse and other overhead cranes which require certain distance.

thumbnail

CWF-11/12

Transmission distance is 80m that is the longer version of CWF-01/02.
Optical axis can be easily adjusted.

thumbnail

DC-JA

7-digit electronic counter
Front size: 24x48mm
White LCD indication

thumbnail

DC-JB/JC

Easy to operate and monitor
Full functions with DIN48 size
Input mode: increment-decrement independent, phase-difference, increment, decrement, increment-decrement command
Output mode: self-holding, one-shot, agree, comparing, standard, batch, prediction, digit-up

thumbnail

DC-JM

Equivalent of 12 counters connected in the parallel form
Output: 1 output (12 OR output)
Can be used as a total counter when the preset value is 0

thumbnail

DC-M

Apart from functions, easy-to-use DIN size is also emphasized.
With 15mm height of LED indication and bigger digital switches, the counter is easy to operate.

thumbnail

DMC

Compatible with DMS-GB/HB-V and DMG-GB/HB, therefore they can be used together as the communication partners.
With detachable connectors, maximum 63 units can be connected to a master unit.

thumbnail

DMG

With the optional device, Data Transfer Checker, you can download the recorded communication data (logging data) when there are troubles such as interlocks.
It’s also readable in a computer screen with the software called SFOC.

thumbnail

DMH-GB/HB

The transmission time is 7ms which is 5 times faster than the normal 8-bit DM series.
So it’s possible to transfer and receive more data within limited time.

thumbnail

DMH-GC/HC

More compact and lighter compare with previous models.
With light emission adjuster, the transmission distance can be easily customized.

thumbnail

DMM

There are compatibilities between:
DMM-GB/HB and DMS-GB/HB-V
DMM-GC/HC (16 bit) and DMH-GC/HC
Therefore they can be used together as the communication partners.
With detachable connectors, maximum 64 units can be connected to a master unit.

thumbnail

DMS

The Optical Data Transmission Device to meet the needs of compactness and lightness.
Body size 50x50x20mm is only half of our previous model DM series.
Weight 210g is much lighter than before.

thumbnail

EWF-0E/1E

100Mbps optical repeater which can directly connet to the Ethernet line.
Setting of MAC address or IP is not required and it can be used as LAN cables.Non-contact transmission is available for up to 100m between moving devices.

thumbnail

FBX-25

One-beam and two-beam types available
Width: 25mm, repeatability: +/-0.1mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

thumbnail

FC-51C

Width: 50mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

thumbnail

FG-31C/51C

Case: die casting
Width: 31mm and 51mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

thumbnail

ISP-A1C

Convert serial data to parallel format or the reverse
Transfer a large number of signals with a few wires
Wireless transmission can be sassily done with our Optical Data Transmission Devices.
Transmission speed is faster compare with the previous model.

thumbnail

KAD-200

Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range.

thumbnail

KAD-300

Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range. KAD-300 is the longer distance version of KAD-200

thumbnail

LAV

High performance design with using semiconductor laser

thumbnail

MBF

Stable operation under severe environment because of using microwave

thumbnail

MBX-211

Detecting accuracy is high because of geometrical setting system

thumbnail

MBX-301CA

Microwave type not affected by vapor, disturbance light or smoke

thumbnail

PBS

Infra-red LED light source, distance measurement type obstacle detector. Fine settings available for each pattern, greatly improved than normal reflective photo sensors. Scanning angle: 180°, compact body with height of 60mm.

thumbnail

PD-10M/8NM

By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Featured points:
Analog output in proportion to distance
Two comparator outputs within any distance

thumbnail

PD5

Stable performance
No influence by color and gloss
Long distance 2.5m

thumbnail

PH-DX/PH-WX

LED type CMD under normal condition

thumbnail

PHV

High performance design with using LED

thumbnail

PRV

Hot metal with 360 to 1,200 degrees C

thumbnail

PVF

Easy to confirm status with the big indicator lamp Driver-free sensibility adjuster

thumbnail

Sensor Head for CMD/HMD

Semiconductor laser type detectors and other various products suitable for severe environments

thumbnail

UAM-02LP-T302

From low mounting in AGVs to vertical mounting for access protection, the compact body fits a wide range of applications.

Conformity Standards
IEC61496-1/3: Type3
IEC61508: SIL2
ISO13849-1: PL d Category3

thumbnail

UAM-05LP-T301/T301C

A compact design for installation on AGVs, AGCs as well as in vertical guarding applications.

Conformity Standards
IEC61496-1/3: Type3
IEC61508: SIL2
ISO13849-1: PL d Category3

thumbnail

UBG-04LX-F01

28msec scanning time, suitable for high speed robots to avoid obstacles or make road map. 4m and 240° scanning range, DC12V.

thumbnail

UBG-05LN

Accuracy is greatly improved compared with PBS series. With DC24V, this sensor can be broadly used for control system or equipment. Field pattern: 31.

thumbnail

URG-04LN

The most compact obstacle detection sensor with distance measurement principle using laser. Able for delicate field settings. Scanning angle is 240°, broader than PBS series. DC5V.

thumbnail

URG-04LX

The first mass production model with the most compact size. Suitable for autonomous service robots as a means of environment and self-position recognition. With compact size and light weight, power consumption is very low. 4m and 240° scanning range, DC5V.

thumbnail

URG-04LX-UG01

Low price model. Best for beginners. USB bus power driven. Obstacle detection for autonomous service robots. Please use Classic-URG when higher accuracy is required.

thumbnail

UST-05LA

Upgraded with wider detection range and faster response time.More flexible field setting is available and even more suitable for obstacle detection of AGVs or load shifting detection.

thumbnail

UST-05LN

Upgraded with wider detection range and faster response time. More flexible field setting is available and even more suitable for obstacle detection of AGVs or load shifting detection.

thumbnail

UST-10/20LX

The smallest and lightest of its kind. The lightness at only 130g make it easy to install on even smaller robots or Unmanned Aerial Vehicles.

thumbnail

UTM-30LN

30m and 270° scanning range. Working under 100,000lx with IP64 protection structure. Suitable for security purpose as a monitor in outdoor environment. 25msec scanning time, also possible for sticking-out detection.

thumbnail

UTM-30LX

30m and 270° scanning range. Working under 100,000lx with IP64 protection structure. Possible for outdoor applications such as service robots. Suitable for robots with higher moving speed because of 25msec scanning time. DC12V.

thumbnail

UTM-30LX-EW

Ethernet interface type of Top-URG. Protection structure is improved to IP67 and it is more suitable for outdoor use even in the environment with 100,000lx.

thumbnail

UXM-30LAH-EWA

Upgraded with finer resolution. Multi-echo functionality and IP67 protection for harsh environments such as rain, snow and fog.More flexible field setting is also available.

thumbnail

UXM-30LN-PW

Stable detection even targeting black objects. Multi-echo functionality and IP67 protection make it possible to operate under harsh environment such as rain, snow and fog.

thumbnail

UXM-30LX-EW

Stable detection even targeting black objects. Multi-echo functionality and IP67 available.

thumbnail

UXM-30LXH-EWA

Upgraded with finer resolution. Multi-echo functionality and IP67 protection for harsh environments such as rain, snow and fog.

Copyright © 2014 HOKUYO AUTOMATIC CO., LTD. All Rights Reserved.