Amplifier built-in photo sensor PEX | Photo sensor | PRODUCTS

Amplifier built-in photo sensor

PEX	Amplifier built-in type photo sensor
	High Functions and Water-proof!

Feature

Protective structure is IP67.
Connector type for easy maintenance is lined-up.
Stable lamp provides.
Installing strength is twice because inserting fitting metal is applied.
Both PNP and NPN output are lined-up.
Detecting distance is 10m for through-beam type, is 2.6m for retro-reflection type and is 0.5m for diffuse reflection type.

Specifications

Kind		Through-beam type		Retro-reflection type		Diffuse-reflection type
						Basic		Short-distance
Mode No.	Cable	PEX-105C	PEX-105A	PEX-263C	PEX-263A	PEX-501C	PEX-501A	PEX-002C
	Connector	PEX-105C -J	PEX-105A -J	PEX-263C -J	PEX-263A -J	PEX-501C -J	PEX-501A -J	PEX-002C -J
Power source		10 to 30VDC(Ripple 10% or less)
Current consumption		Projector : 20mA or less, Receiver : 15mA or less
Light source		Red LED
Detecting distance		10m		2.6m^*1		0.5m^*2		1 to 70mm^*2
Detectable objects		Opaque objects with φ8mm or more		Opaque objects with φ50mm or more^*1		Transparent/opaque objects
Response time		0.5msec or less
Operating mode		Changeover by switch(L : Light-ON, D : Dark-ON)
Output		NPN	PNP	NPN	PNP	NPN	PNP	NPN
Control output		NPN/PNP open-collector, 100mA 30VDC or less, Residual voltage 1.8V 100mA or less
Sensitivity adjuster		Fixed^*3		Provided
LED		Stable lamp : Green LED, Operating lamp : Orange LED^*4
Connection		Cable : φ3.8mm, 2m long, 3 cores^*5, Connector : M8(4 pins) connector
Ambient illuminance		Incandescent lamp : 3,000lx or less, Sun light : 10,000lx or less
Ambient temperature/humidity		-25 to ＋55 degrees C（-40 to +70 degrees C 70 degrees C when stored）, 35 to 85%RH(35 to 90%RH when stored), Not condensing
Vibration resistance		Double amplitude 1.5mm, 10 to 55Hz, each 2 hour in X, Y and Z directions
Impact resistance		1,000m/s², Each 3 time in X, Y and Z directions
Protective structure		IP67(IEC standard)
Case material		Body : resin with ABS glass fiber, Lens(Front cover) : PMMA resin
Weight		Approx. 50g
Attachment		Fitting metal		Fitting metal, reflector(RRP-50S-V)		Fitting metal

*1 When using RRP-50S-V
*2 Using white paper with 20cm□
*3 PEX-105C-0V01 with sensitivity adjuster is lined-up.
*4 Not provides with projector
*5 Only projector is 2 cores

External dimension

●Lead wire type

*1 Center position of projecting-light for retro/refuse-reflection type.
*2 Center position of projecting/receiving-light for through-beam type and center position of
receiving-light for retro/refuse-reflection type.

●Connector type