U-shaped photo sensor |
 |
FB-10C/10M |
Amplifier built-in type U-shaped photo sensor |
|
Compact size with 10mm as sensing distance and repeatability ±0.1mm! |
Feature
- Compact design
- Any adjustments are not required
- High repeatability
- Relay output type is lined-up
Specifications
Kind |
Through-beam type |
|
Model No. |
FB-10C |
FB-10M |
Power source |
12 to 24VDC |
12VDC |
Current consumption |
25mA or less |
40mA or less |
Light source |
Infra-red LED |
|
Distance between projector and receiver |
10mm(fixed) |
|
Detectable objects |
Opaque object with φ4mm or more |
|
Operating mode |
Changeover by control wire(Pink) |
Dark-ON |
Control output |
NPN transistor/open-collector output, |
1a relay(100VAC 0.5A cosφ=1) |
Response time |
1msec or less |
10msec or less |
Repeatability |
±0.1mm |
|
Indicators |
Operating lamp : red LED(Lights up when light-entering) |
|
Connection |
Cable type(2m long, 0.2mm2 ) |
|
Ambient illuminance |
Incandescent lamp : 10,000lx or less |
|
Ambient temperature/humidity |
-10 degrees C to ＋55 degrees C, 45 to 85％RH |
|
Insulation resistance |
20MΩ or more(500V megger) |
|
Withstand voltage |
1,000VAC/min. 50/60Hz |
|
Vibration resistance |
Double amplitude 1.5mm, 10 to 33Hz, Each 2 hour in X, Y and Z directions |
|
Impact resistance |
200m/s2, Each 3 time in X, Y and Z directions |
|
Protective structure |
IP40(IEC standard) |
|
Case materials |
PMMA resinl |
|
Weight |
Approx. 40g |
Approx. 60g |
External dimension
Caution items
* Don't make a parallel wiring with high-voltage and power line. It may cause a malfunction because of induction.
* Don't detect transparent object such as glass etc.
* Don't use at the places where water splashes or vapor exists. Don't use at the places where over rated temperature, humidity or impact exists.
Output circuit
FB-10C
Operating mode changeover(Pink)
1. Output transistor ON when light-entering(connected to +V side)
2. Output transistor ON when light-interruption(connected to 0V side)
Connection
FB-10C
FB-10M
