U-shaped photo sensor |
 |
FB-5C |
Amplifier built-in type U-shaped photo sensor |
|
Compact size with 5mm as sensing distance and low cost! |
Feature
- Compact design
- Any adjustments are not required
- Fast response time and high repeatability
Specifications
Type |
Through-beam type |
Model No. |
FB-5C |
Light source |
Infra-red LED |
Power source |
12 to 24VDC（±10％, Ripple 5% or less） |
Current consumption |
20mA or less |
Distance between projector and receiver |
5mm（fixed） |
Detectable objects |
Opaque object with φ3.5mm or more |
Operating mode |
Changeover by control wire(Pink) |
Control output |
Changeover by control wire(Pink) |
Response time |
1msec or less |
Repeatability |
±0.1mm |
Indicators |
Operating lamp : red LED(Lights up when executing output) |
Connection |
Cable type(2m long, 0.2mm2 ) |
Ambient illuminance |
Incandescent lamp : 10,000lx or less |
Ambient temperature/humidity |
竏驤10 degrees C to ＋55 degrees C, 45 to 85％RH |
Vibration resistance |
Double amplitude 1.5mm, 10 to 33Hz, Each 2 hour in X, Y and Z directions |
Impact resistance |
100m/s2, Each 3 time in X, Y and Z directions |
Protective structure |
IP50(IEC standard) |
Case materials |
Steel(ABS resin at bottom) |
Weight |
Approx. 40g |
External dimension
Caution items
* Don't make a parallel wiring with high-voltage and power line. It may cause a malfunction because of induction.
* Short-circuit protective circuit is not provided. Don't connect power source or capacity load directly.
* Don't detect transparent object such as glass etc.
* Don't use at the places where water splashes or vapor exists. Don't use at the places where over rated temperature, humidity or impact exists.
Output circuit
Operating mode changeover(Pink)
1. Output transistor ON when light-entering(connected to +V side)
2. Output transistor ON when light-interruption(connected to 0V side)
Connection
