Distance sensor |
 |
PD-10M/8NM |
Optical distance sensor |
|
Converting distance data to analog! |
Feature
- This sensor is an optical distance sensor with infrared ray.
- This sensor provides comparator output(2 output) that can set optional distance value and alarm output that executes at the out of detectable area.
- This sensor provides light-emission stop output for preventing interference.
Specifications
PD-10M/PD-10M2
Model No. |
PD-10M |
PD-10M2 |
|
Power source |
24VDC(±10%, ripple 10% or less) |
||
Current consumption |
125mA or less |
||
Detecting distance |
0.2 to 10m(when using specified reflector) |
||
Detectable objects |
Plastic reflector with φ100mm(specified reflector)*1 |
||
Repeatability |
±100mm |
||
Absolute accuracy |
±200mm |
||
Hysteresis |
300mm |
||
Resolution |
40mm |
||
Output |
Distance analog output |
0 to 10V(Output impedance 100Ω) |
0 to 10V(Output impedance 100Ω) |
Alarm output |
NPN open-collector output(30VDC, 50mA or less), ON when normal operation/OFF when it is out of detection area or light-reception level is less than rated value |
||
Comparator output(OUT 1,2) |
NPN open-collector output(30VDC, 50mA or less), OFF when it is within detection distance |
||
Input |
Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up) |
||
Lamps |
Power lamp(Green LED) : Lights up when putting power source on |
||
Directional angle |
±2.5° |
||
Response time |
50msec or less*2 |
||
Connection |
Cable 1m long |
||
Ambient illuminance |
Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less |
||
Ambient temperature/humidity |
-10 degrees C to +50 degrees C, 85%RH or less(Not icing) |
||
Vibration resistance |
10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions |
||
Impact resistance |
490m/s2 Each 10 time in X, Y and Z directions |
||
Case |
Polycarbonate |
||
Weight |
Sensor : approx. 200g, RRP-100 : approx. 65g |
||
*1 Reflection sheet is available, too. Ask us.
*2 It doesn't measure during 200msec after putting power source on.
PD-8NM1
Model No. |
PD-8NM1 |
|
Power source |
24VDC(±10%, ripple 10% or less) |
|
Current consumption |
125mA or less |
|
Detecting distance |
0.2 to 8m(when using 2 pcs of specified reflector) |
|
Detectable objects |
2 pcs of plastic reflector with 80mm□(specified reflector) |
|
Repeatability |
±100mm |
|
Absolute accuracy |
±200mm(at 5m or less), ±300mm(at 5m or more) |
|
Hysteresis |
300mm |
|
Resolution |
40mm |
|
Output |
Distance analog output |
0 to 10V(Output impedance 100Ω) |
Comparator output(OUT 1,2,3) |
NPN open-collector output(30VDC, 50mA), OFF when it is within detection distance |
|
Input |
Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up) |
|
Lamps |
Power lamp(Green LED) : Lights up when putting power source on |
|
Directional angle |
±2.5° |
|
Response time |
50msec or less |
|
Connection |
Cable 1m long |
|
Ambient illuminance |
Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less |
|
Ambient temperature/humidity |
-10 degrees C to +50 degrees C, 85%RH or less(Not icing) |
|
Vibration resistance |
10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions |
|
Impact resistance |
490m/s2 Each 10 time in X, Y and Z directions |
|
Case |
Polycarbonate |
|
Weight |
Sensor : approx. 200g, exclusive reflector for PD8 : approx. 42g |
|
* It doesn't measure during 200msec after putting power source on.。
External dimension
Sensor
* Output 3 in case of PD-8NM1
Reflector RRP-100 |
Exclusive reflector for PD-8NM1 |
|
|
Input/output circuit
PD-10M/PD-10M2 |
PD-8NM1 |
|
|
* It can stop to emit by short-circuited to -VIN(0V)
