Sensor for special applications/Textile |
 |
|
FC5-71 |
Sensors for Textile Industry |
|
|
Preventing the malfunctions by temporary slack This is U-shape sensor which is consisting of projector, receiver and amplifier in one body. This is mounted in the entrance of the coiler and detects coiler blockage or sliver breakage. |
Feature
- Easy handling
- Special timer for preventing malfunctions by temporary slack is incorporated.
- Relay output(1a relay).
- Compatible with FC5-61.
Application
|
|
Coiler blockage/ Sliver breakage |
|
|
This sensor detects coiler blockage and sliver breakage. |
||
|
|
||
Specifications
|
Kind |
Through-beam type |
|
Model No. |
FC5-71 |
|
Light source |
Infra-red LED |
|
Power source |
AC12 to 24V ±10％ 50/60Hz |
|
Power consumption |
1VA or less(at 12VAC), 3VA or less(at 24VAC) |
|
Distance between projector and receiver |
50mm(fixed) |
|
Detectable objects |
Sliver withφ10mm or more(opaque objects) |
|
Response time |
Executed after 5sec(interrupting state) and 1sec(light-entering state) |
|
Operating mode |
Light-ON* |
|
Control output |
1a relay(125VAC 0.5A cosφ＝1), single-shot output for 1sec. |
|
Indicators |
RDY lamp |
|
Connection |
Cable type(3.5m long, 0.3mm2) |
|
Ambient illuminance |
Incandescent lamp : 10,000lx or less |
|
Ambient temperature/humidity |
-10 degrees C to +50 degrees C, 45 to 85％RH |
|
Vibration resistance |
Double amplitude 1.5mm, 10 to 50Hz, Each 2 hour in X, Y and Z directions |
|
Impact resistance |
198m/s2, Each 3 time in X, Y and Z directions |
|
Protective structure |
IP52(IEC standard) |
|
Case materials |
Case : PBT resin |
|
Weight |
Approx. 200g |
*After the beam is interrupted completely by sliver for 5sec., if complete light-entering is for 1sec or more, it operates.
External dimension
Caution items
Make sure t o make a single wiring basically because if making a wiring with power line etc., it ma y be affected by noise.
If extending the cable, use cabtyre cable with 0.3mm2 o r more and length should b e 100m o r less.
If using commercial switching regulator as power source, make sure t o earth FG(frame ground terminal) and G(ground terminal).
Connection
