よくあるご質問
FAQ
Scanning Range Finder (Area Configuration Type)
If PBS-03JN is affected by ambient light or vibration,how is the malfunction output and outputs 1 to 3?
If PBS-03JN is affected by ambient light or vibration, will the malfunction output basically turn off and outputs 1 to 3 also turn off?
When ambient light enters the photo interrupter and become in unknown state where the origin point is, the malfunction output turns OFF.
However it depends on the environment. Even when just only ambient light enters, it sometimes makes output 1 to 3 turn OFF as if it detects something.
Relation
-
Is there any software to transfer area data from PBS-03JN to UST-05LN?
-
The PBS configured area has disappeared.
The power is on and the green indicator light is on, but it doesn't detect any obstacles entering the area. -
Is it possible to use a USB conversion cable when setting the area?
-
I want to connect to a PC and edit the area with the application, but the sensor is not recognized.
What should i do? -
Why is the spread of the light beam different from the front and the side of the LiDAR?
FAQ's Category
- Sensor for Textile Industry
- Application
- Laser Range Finder
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
FAQ's Tag
- DMG
- EH8
- LX2
- PA-S
- MC-A201
- KAD
- HSA
- PR
- BRS
- PH-DX
- PBS
- PH
- PD
- DMF
- S-20
- UXM
- LEX
- AC
- ISP
- RS controller
- FBX
- PEX
- PA
- KRG
- HMPD
- BRC
- EP1
- PFX
- UTM
- LA
- DC
- PK7
- PG
- PGL
- FHM
- FC
- PEY
- DME
- YVT
- DMS
- PLX
- post_tag-195
- ISL
- UST
- EWF
- FG
- DM
- PD5
- URM
- BWF
- VMH
- PDL
- CWF
- UAM
- DMM
- MBX
- PNX
- DWF
- PX1
- UGM
- MFG
- DMH
- PA-SC2
- PHE
- UBG
- PB9
- LX1
- DMC
- PHF
- URG
- post_tag-163
- LAD
- BNC
- DMJ
- MBF
- LAV
- PL1
- PCF