よくあるご質問
FAQ
Scanning Range Finder (Area Configuration Type)Scanning Range Finder (Data Output Type)
Is there a solution when I don't know the IP address of the range sensor?
Is there anything I can do if I don't know the IP address of the range sensor?
If you want to find the IP address, please use the application software “IP Discovery”.
If you want to initialize, connect the IP reset input of the wiring to the minus- side.
At that time, connect the input common plus to the plus+ side.
If you turn the input on for 2 seconds or longer and then turn it off, UST will restart.
Relation
-
Is it compatible with Windows 10?
-
If a highly reflective background is used as the measured target, should I offset the measured value uniformly by "200 mm"? Or does the distance differ depending on the type of high-reflective object?
-
Even if I set the area of UST-30LC and write it, it is not reflected even if I check it in monitor mode. Why?
-
Does it work even if power is supplied from the battery?
-
What is the maximum voltage and current for the output of the UST-05LN?
FAQ's Category
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
- Sensor for Textile Industry
- Application
- Laser Range Finder
FAQ's Tag
- PEY
- PA-S
- PL1
- LAD
- LX1
- DMH
- PNX
- PDL
- DM
- post_tag-195
- BRS
- PK7
- EP1
- PA
- AC
- PD
- PR
- LX2
- LAV
- post_tag-163
- CWF
- RS controller
- S-20
- PH-DX
- MC-A201
- PCF
- BNC
- DMC
- PA-SC2
- DWF
- PB9
- PD5
- ISL
- DME
- PG
- PFX
- KRG
- ISP
- DMF
- DMG
- EWF
- DMS
- FHM
- LA
- HMPD
- FBX
- UXM
- PBS
- KAD
- BWF
- DMJ
- PHF
- PHE
- PX1
- UAM
- URM
- UST
- YVT
- PGL
- LEX
- MFG
- MBX
- VMH
- FG
- PLX
- FC
- DC
- BRC
- PEX
- UTM
- PH
- HSA
- EH8
- MBF
- URG
- UBG
- UGM
- DMM