よくあるご質問
FAQ
3D LiDARScanning Range Finder (Area Configuration Type)
Why is the point cloud data not displayed even when YVT is connected to the software?
Why is the point cloud data not displayed even when YVT is connected to the software?
Make sure if the YVT is connected to the app.
If it is not connected, you will need to change your IP address.
Please see the detail in the product page.
If the unit is connected to the app and the point cloud data is not displayed, it is not maybe checked the mark in “Point Cloud”.
Relation
-
Do you need a exclusive driver for Ethernet type?
-
Is there anything I can do if I don't know the IP address of the range sensor?
-
Is it possible to install the sensor upside down?
-
Does it work even if power is supplied from the battery?
-
Is it possible to use a USB conversion cable when setting the area?
FAQ's Category
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
- Sensor for Textile Industry
- Application
- Laser Range Finder
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
FAQ's Tag
- PX1
- UGM
- MFG
- DMH
- PA-SC2
- PHE
- UBG
- PB9
- LX1
- DMC
- PHF
- URG
- post_tag-163
- LAD
- BNC
- DMJ
- MBF
- LAV
- PL1
- PCF
- DMG
- EH8
- LX2
- PA-S
- MC-A201
- KAD
- HSA
- PR
- BRS
- PH-DX
- PBS
- PH
- PD
- DMF
- S-20
- UXM
- LEX
- AC
- ISP
- RS controller
- FBX
- PEX
- PA
- KRG
- HMPD
- BRC
- EP1
- PFX
- UTM
- LA
- DC
- PK7
- PG
- PGL
- FHM
- FC
- PEY
- DME
- YVT
- DMS
- PLX
- post_tag-195
- ISL
- UST
- EWF
- FG
- DM
- PD5
- URM
- BWF
- VMH
- PDL
- CWF
- UAM
- DMM
- MBX
- PNX
- DWF