よくあるご質問
FAQ
This is reported when the laser light returns directly to the light emitting part instead of the light receiving element part due to the dirt on the glass of the laser light emitting outlet.
[Countermeasure]
Clean the glass at the laser outlet. If this measure does not work, please contact our offices for more support.
Relation
-
When connecting the shield of PGL, where should I connect it to?
-
Should I install the PGL based on the center of its housing or the center of the laser spot?
-
I think there is sampling of PGL-050W3 / 180W3, normal / high speed mode.
Is there any difference in how to capture values between normal and high speed? Is it just a difference in time?
There seemed to be a difference other than time. Please tell me. It is used to detect the end face of a steel rod,
It seems that he wants to refer to it in the averaging process when there are fluctuations due to heat and variations due to temperature. -
Are there any countermeasures in case of interference between PGL and BWF-2C?
-
PGL is connected to PLC.
I wrote a command for measuring data, but I could get the data only once.
How can I get the data continuously?
FAQ's Category
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
- Sensor for Textile Industry
- Application
- Laser Range Finder
FAQ's Tag
- PEX
- PA
- KRG
- FBX
- BRC
- EP1
- PFX
- HMPD
- DC
- PK7
- PG
- UTM
- LA
- FC
- PEY
- DME
- PGL
- FHM
- PLX
- post_tag-195
- ISL
- YVT
- DMS
- FG
- DM
- PD5
- UST
- EWF
- VMH
- PDL
- CWF
- URM
- BWF
- MBX
- PNX
- DWF
- UAM
- DMM
- MFG
- DMH
- PA-SC2
- PX1
- UGM
- PB9
- LX1
- DMC
- PHE
- UBG
- post_tag-163
- LAD
- BNC
- PHF
- URG
- LAV
- PL1
- PCF
- DMJ
- MBF
- LX2
- PA-S
- MC-A201
- DMG
- EH8
- PR
- BRS
- PH-DX
- KAD
- HSA
- PD
- DMF
- S-20
- PBS
- PH
- AC
- ISP
- RS controller
- UXM
- LEX