よくあるご質問
FAQ
Scanning Range Finder (Area Configuration Type)
Is it okay if water droplets adhere to the optical window of the UST-30LX?
The UST-30LX has multi-echo support and stain resistance, but what about water droplet adhesion?
UST-30LX is processed separately for low sensitivity and high sensitivity.
If there are water droplets near the projection laser of the optical window, the laser will be scattered and the data will be at short distances, or the signals at short and medium distances (approximately 1.5 m or less) may overlapped and resulting in strange.
Relation
-
Please tell me about the output residual voltage of URM and UST.
-
I want to connect to a PC and edit the area with the application, but the sensor is not recognized.
What should i do? -
A white connector is attached at the time of delivery. Is this for making connection?
-
Why is the spread of the light beam different from the front and the side of the LiDAR?
-
Even if I set the area of UST-30LC and write it, it is not reflected even if I check it in monitor mode. Why?
FAQ's Category
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
- Sensor for Textile Industry
- Application
- Laser Range Finder
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
FAQ's Tag
- PX1
- UGM
- MFG
- DMH
- PA-SC2
- PHE
- UBG
- PB9
- LX1
- DMC
- PHF
- URG
- post_tag-163
- LAD
- BNC
- DMJ
- MBF
- LAV
- PL1
- PCF
- DMG
- EH8
- LX2
- PA-S
- MC-A201
- KAD
- HSA
- PR
- BRS
- PH-DX
- PBS
- PH
- PD
- DMF
- S-20
- UXM
- LEX
- AC
- ISP
- RS controller
- FBX
- PEX
- PA
- KRG
- HMPD
- BRC
- EP1
- PFX
- UTM
- LA
- DC
- PK7
- PG
- PGL
- FHM
- FC
- PEY
- DME
- YVT
- DMS
- PLX
- post_tag-195
- ISL
- UST
- EWF
- FG
- DM
- PD5
- URM
- BWF
- VMH
- PDL
- CWF
- UAM
- DMM
- MBX
- PNX
- DWF