よくあるご質問
FAQ
Scanning Range Finder (Area Configuration Type)Scanning Range Finder (Data Output Type)
About the white connector attached at the time of delivery (Range sensor)
A white connector is attached at the time of delivery. Is this for making connection?
A white connector for our internal inspection is attached at the time of delivery.
When using the sensor, please cut the connector off and process it as you like.
The connectors are SHR-14V-S and SHR-06V-S manufactured by J.S.T.Crimping Terminal.
It cannot be used for relay purposes.
Relation
-
Please tell me about the output logic of the Scanning Range Finder.
-
When using URG-04LX-UG01, it is necessary to prepare a USB cable separately, can I use other cables other than Hokuyo's original URG-C001?
-
When setting with the muting function, it is necessary to set a time difference but it is not possible to set them at the same time.
How much time difference should be set not to be simultaneously? -
If PBS-03JN is affected by ambient light or vibration, will the malfunction output basically turn off and outputs 1 to 3 also turn off?
-
Does the range sensor (PBS / UST / UAM) use OSSD?
FAQ's Category
- Sensor for Textile Industry
- Application
- Laser Range Finder
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
FAQ's Tag
- DMG
- EH8
- LX2
- PA-S
- MC-A201
- KAD
- HSA
- PR
- BRS
- PH-DX
- PBS
- PH
- PD
- DMF
- S-20
- UXM
- LEX
- AC
- ISP
- RS controller
- FBX
- PEX
- PA
- KRG
- HMPD
- BRC
- EP1
- PFX
- UTM
- LA
- DC
- PK7
- PG
- PGL
- FHM
- FC
- PEY
- DME
- YVT
- DMS
- PLX
- post_tag-195
- ISL
- UST
- EWF
- FG
- DM
- PD5
- URM
- BWF
- VMH
- PDL
- CWF
- UAM
- DMM
- MBX
- PNX
- DWF
- PX1
- UGM
- MFG
- DMH
- PA-SC2
- PHE
- UBG
- PB9
- LX1
- DMC
- PHF
- URG
- post_tag-163
- LAD
- BNC
- DMJ
- MBF
- LAV
- PL1
- PCF