Products List

PHV

High performance design with using LED
This series are ideal for detection steel materials in harsh environments at steel plants and heavy industry.

PRV

Fiber optic type HMD.
It operates by detecting infrared rays (heat rays) radiated from the heat material.
It is ideal for detecting steel materials at steel plants and heavy industry in harsh environments. Detectable hot metal temp is 360 to 1,200 degrees C

MBX-301CA

Microwave type not affected by vapor, disturbance light or smoke

MBX-211

Detecting accuracy is high because of geometrical setting system

LAV

High performance design with using semiconductor laser.
This series are ideal for detection steel materials in harsh environments at steel plants and heavy industry.

MBF

Stable operation under severe environment because of using microwave

PD-10M/8NM

By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Featured points:
Analog output in proportion to distance
Two comparator outputs within any distance

FG-31C/51C

Case: die casting
Width: 31mm and 51mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

FC-51C

Width: 50mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

FBX-25

One-beam and two-beam types available
Width: 25mm, repeatability: +/-0.1mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

DMJ-G/HB1

This is Parallel I/O (8-bit) with RJ-11 modular cable type.
It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this.
This is provided with a logging function and corresponded to SEMI E84.
This composes of Head, Connector and RJ-11 cable, it is user friendly to make wiring.

DMH-GC/HC

More compact and lighter compare with previous models.
With light emission adjuster, the transmission distance can be easily customized.

BWF-3E/4E-CE

Optical Data Transmission Device / Open Network

CWF-01/02

All necessary features are included within the body size 80x80x40mm.
Applications are for controlling starker cranes of automatic warehouse and other overhead cranes which require certain distance.

CWF-11/12

Transmission distance is 80m that is the longer version of CWF-01/02.
Optical axis can be easily adjusted.

EWF-0/1E-N

100Mbps optical repeater which can directly connet to the Ethernet line.
Setting of MAC address or IP is not required and it can be used as LAN cables.Non-contact transmission is available for up to 100m between moving devices.

*This model integrates the conventional model.

BRS

Compare with the traditional model, this new series is much smaller and thinner.
Backlight in the screen makes it easy to see.
Lifetime is improved by suing the sheet switch in the key board.

BRC-G

4-point and 12-point type are available
Meet the industrial needs with its high reliability

BNC

You can confirm the operation quality before or after SEMI E84 communication using the device.
With 2 types of application software, you can read the following data in the form of timing chart through a computer:
a) Interlocks simulation before handling materials
b) Optical communication logging data in DMG sensor after handling materials, as a method of solving troubles

ISP-A1C

Convert serial data to parallel format or the reverse
Transfer a large number of signals with a few wires
Wireless transmission can be sassily done with our Optical Data Transmission Devices.
Transmission speed is faster compare with the previous model.

YVT-35LX-F0/FK

3D LRF
3D Scanning Range Finder.
The distance is measured by steering the laser beam vertically and horizontally.
In 1 frame, a point cloud with 2590 points is generated.
It is possible to increase the point cloud density using the interlacing mode.
This scanner is equipped with an acceleration sensor and a PPS input signal.

PBS-03JN

Infra-red LED light source, distance measurement type obstacle detector.
Fine settings available for each pattern,
greatly improved than normal reflective photo sensors.
Scanning angle: 180°

UTM-30LN

30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Suitable for security purpose as a monitor in outdoor environment.
25msec scanning time, also possible for sticking-out detection.

UTM-30LX

30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Possible for outdoor applications such as service robots.
Suitable for robots with higher moving speed because of 25msec scanning time.

UAM-05LECA-T301

New EtherCAT type added to the UAM series
A safety laser scanner with 5 meter protection zone and 270° scanning angle, allowing flexible area configuration. It also allows easy management of multiple sensors over a single network.
Ideal for managing multiple robots together and sharing AGV speed information across the network.
Certified safety device compliant with international safety standards.

UXM-30LN-PW

Stable detection even targeting black objects.
Multi-echo functionality and IP67 protection,
and make it possible to operate under harsh environment such as rain, snow and fog.

UGM-50LXP/ UGM-50LXN

Max. distance 120m for outdoor.
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.

UGM-50LAP/ UGM-50LAN

Max. distance 120m for outdoor.
Area Output Model
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.

UXM-30LXH-EHA

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.

UXM-30LAH-EHA

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.

UXM-30LXH-EWA

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.

UXM-30LAH-EWA

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
More flexible field setting is also available.

UAM-05LP-T301/T301C

Safety Sensor
A compact design for installation on AGVs, AGCs as well as in vertical guarding applications.
Conformity Standards
IEC61496-1/3: Type3
IEC61508: SIL2
ISO13849-1: PL d Category3

UAM-05LPA-T301/T301C

Safety laser scanner with 5m and 270°protection range.
It is compact, highly functional, and easy to use, and can improve the efficiency and operation rate of factories and logistics by providing safety measures for AGVs, robots, machinery, etc.
It can replace protective fences, light curtains and mat switches.
Safety standard certified.
*Improved environmental resistance compared to conventional UAM.

AreaDesigner for Tablet

Android/iOS app of AreaDesigner for tablet

Measurement monitoring and confirmation of area settings is possible from Android/iOS tablet device.