Products List

High performance design with using LED
This series are ideal for detection steel materials in harsh environments at steel plants and heavy industry.

Fiber optic type HMD.
It operates by detecting infrared rays (heat rays) radiated from the heat material.
It is ideal for detecting steel materials at steel plants and heavy industry in harsh environments. Detectable hot metal temp is 360 to 1,200 degrees C

High performance design with using semiconductor laser.
This series are ideal for detection steel materials in harsh environments at steel plants and heavy industry.

Semiconductor laser type detectors and other various products suitable for severe environments

By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Featured points:
Analog output in proportion to distance
Two comparator outputs within any distance

Case: die casting
Width: 31mm and 51mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

Width: 50mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

One-beam and two-beam types available
Width: 25mm, repeatability: +/-0.1mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability

This is Parallel I/O (8-bit) with RJ-11 modular cable type.
It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this.
This is provided with a logging function and corresponded to SEMI E84.
This composes of Head, Connector and RJ-11 cable, it is user friendly to make wiring.

You can confirm the operation quality before or after SEMI E84 communication using the device.
With 2 types of application software, you can read the following data in the form of timing chart through a computer:
a) Interlocks simulation before handling materials
b) Optical communication logging data in DMG sensor after handling materials, as a method of solving troubles

3D LRF
3D Scanning Range Finder.
The distance is measured by steering the laser beam vertically and horizontally.
In 1 frame, a point cloud with 2590 points is generated.
It is possible to increase the point cloud density using the interlacing mode.
This scanner is equipped with an acceleration sensor and a PPS input signal.

Infra-red LED light source, distance measurement type obstacle detector.
Fine settings available for each pattern,
greatly improved than normal reflective photo sensors.
Scanning angle: 180°

30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Suitable for security purpose as a monitor in outdoor environment.
25msec scanning time, also possible for sticking-out detection.

30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Possible for outdoor applications such as service robots.
Suitable for robots with higher moving speed because of 25msec scanning time.

Ethernet interface type of Top-URG.
Protection structure is improved to IP67,
and it is more suitable for outdoor use even in the environment with 100,000lx.

Stable detection even targeting black objects.
Multi-echo functionality and IP67 available.

Stable detection even targeting black objects.
Multi-echo functionality and IP67 protection,
and make it possible to operate under harsh environment such as rain, snow and fog.

Max. distance 120m for outdoor.
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.

Max. distance 120m for outdoor.
Area Output Model
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.

NEW MODEL
New 2D Scanning Range Finder for outdoor
Compact model and the 40m range.
Multi-echo functionality and IP67 protection with it.

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.

Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
More flexible field setting is also available.

Outdoor model with Small Size
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on even smaller robots or Unmanned Aerial Vehicles.

Scanning Rangefinder / Area configuration type

Outdoor model with Small Size
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on even smaller robots or Unmanned Aerial Vehicles.

The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on
even smaller robots or Unmanned Aerial Vehicles.

10m and 20m Scanning Range and Compact!
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.

Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.

New model : Distance output type of the UST-05 series.
Upgraded with wider detection range and faster response time.

Very compact!
NPN and PNP types are available.
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.

Prototype (limited quantity)
Mass production planned for early 2024
3D LiDAR jointly developed with Lumotive
Press Release

Safety Sensor
A compact design for installation on AGVs, AGCs as well as in vertical guarding applications.
Conformity Standards
IEC61496-1/3: Type3
IEC61508: SIL2
ISO13849-1: PL d Category3

Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range. KAD-300 is the longer distance version of KAD-200

Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range.

Safety laser scanner with 5m and 270°protection range.
It is compact, highly functional, and easy to use, and can improve the efficiency and operation rate of factories and logistics by providing safety measures for AGVs, robots, machinery, etc.
It can replace protective fences, light curtains and mat switches.
Safety standard certified.
*Improved environmental resistance compared to conventional UAM.

NEW 180m Distance (maximum)
Laser Distance Measurement
Long distance type laser sensor
Two models are available

3D range sensor (3D LiDAR)
Fully solid-state mechanical-less drive

Distance: 0.5 to 10m
Field of View: Max.120°(H) x 90°(V)
Parameters of the field of view and resolution can be dynamically changed depending on the software settings.
Ideal for applications such as AMR, forklifts, and service robots.
ROS compatible.